The HID EdgePlus™ IP Access Solution puts control and user interface right at the door. The EdgePlus Solo ES400 is a cost-effective, stand-alone, single-door IP access control solution.  This easy-to-use solution enables remote management and report generation via standard web browser.  User information, administration, door configuration and retrieval of events are done through a user-friendly, instructional web environment. 

• Embedded User Interface, no external software requirement
• Remotely managed via standard web browser
• Web Browser Security - Edge Solo products use SSL 3.0 (Secure Socket Layer) and TLS 3.1(Transport Layer Security) to establish a secure web browser connection.   
• Works within DHCP or Static IP networks for plug and play installation
• Multi Language Support - Edge Solo supports the following languages: English, French, German, Spanish (International), Russian, Portuguese (Brazilian), Italian, Chinese (Simplified), Japanese, Korean, Hindi, Dutch and Turkish.   
• “Door Dashboard” accesses door commands, status, alarms, and recent events from all screens
• Back-up and restore of data from user PC
• Built-in diagnostics   
• Installer “calling card” allows inclusion of contact information for user support   
• User upgradable firmware   
• Built-in help screens
• Manages Card only, PIN only, Card and PIN   
• Manages 1000 cardholders/credentials   
• Manages 8 schedules and 3 intervals each day   
• View last 5000 events   
• Standardized report generation, including CSV export
• Manages PIN Suppression Schedules
• First Person In (Snow day) Schedules   
• Built-in 802.3af Power over Ethernet (PoE), with 700 mA available for external field devices and locking hardware   
• Easily migrates to a host based system - (OEM)
• Wet or Dry door relays   
• Permits local laptop computer connections for diagnostics and configuration  
• UL 294 Listed - EdgePlus Solo 83000B is UL 294 listed for use with all Listed HID Global models: iCLASS, HID Prox, Indala Prox, bioCLASS, SmartID, SmartTRANS, and Mag Stripe series, up to 128-bit formats. EdgePlus is UL listed for installation with the protected area; attached remote Readers may be located outside the protected area
• Mounting - Mount to a single gang style electrical box with two screws. The EdgePlus™ includes tamper protection for this type of  installation to secure all wiring within the electrical box. For indoor mounting only.
• Easily Interfaced
   ° RJ-45 connector for Ethernet TCP/IP
   ° Quick-disconnect screw terminal connectors
   ° Easily upgrades to a hosted software solution through the network interface
• Inputs for
   ° 1 reader
   ° 1 door monitor switch
   ° 1 Request-to-Exit switch
   ° AC Fail Monitor
   ° Battery Fail Monitor
   ° Enclosure Tamper
 

• Non-latching wet/dry relay outputs for
   ° 1 door strike
   ° 1 auxiliary device: door held/forced alarm, alarm shunt, host offline (comms down), or general purpose
• Mounting: Single-gang style electrical box
• Dimensions: 3.3” W x 4.8” H x 1.5” D (83.8 mm x 121.9 mm x 36.3 mm)
• Weight: 6.8 oz (.195 kg)
• Style: Attractive UL94 polycarbonate enclosure protects components from damage and all connections are fully identified by silk-screened nomenclature.
• Card Data Formats: Supports any card data format up to 128 bits
• Hardware: 32-bit RISC CPU, 100 MHz processor
• Memory: 8 MB onboard Flash memory (32 MB SDRAM, 256K SRAM)
• Visual Indicators: Two LEDs indicate power/network activity and device I/O activity.
• Power Supply Requirements: 1A @ 12-16 VDC maximum
   ° Recommended: Power is supplied using the Power over Ethernet technology available with PoE (802.3af) enabled network devices.
   ° Alternate: Supervised linear power supply with battery backup, input surge protection, and  AC Fail and battery low contact outputs.
   ° Available Power (Relays can be configured to supply power as follows): The ES400 is capable of supplying a total of 700 mA to field devices.  This power may be shared between a reader and one or two additional field devices. Unpowered, relay contacts are rated for 2A @ 30 VDC
   ° Note: Use of a Listed Access Control / Burglary power-limited power supply is required for all Listed installations.
• Operating Temperature (The ES400 is intended for use in indoor environments that comply with the following specifications): 32° to 122° F (0° to 50° C)
• Operating Humidity: 5% to 95% relative, non-condensing
• Communication Ports: Ethernet (10 or 100 Mbps) / Reader (Wiegand, HID Clock-and-Data)
• Warranty: Warrantied against defects in materials and workmanship for 18 months (See complete warranty policy for details).
 

• ES400 Datasheet
• ES400 How to Order Guide
• ES400 Installation Guide